Underdash, Switch and Louver Plenum, 2" Duct Hose Inlet Dimensions: 3-1/2" tall x 26-1/2" wide x 3-1/4" deep Switches Sold Separately For use with 2-1/2" duct hose, see part #32-22X Made in the ...

Underdash, Switch and Louver Plenum, 2-1/2" Duct Hose Inlet Dimensions: 3-1/2" tall x 26-1/2" wide x 3-1/4" deep Switches Sold Separately For use with 2" duct hose, see part #32-22 Made in the ...

Underdash Dual Rectangular Vents, with Floor Outlets, for 2-1/2" Duct Hose Dimensions: 11-1/2" wide x 2" tall For use with 2" duct hose, see part #32-3F Made in the ...

Rectangle Louver w/ Housing, for 2 Inch Duct Hose Inlet For 2-1/2" Duct Hose, use part #32-1X Dimensions: 6-1/4" wide x 2" tall Made in the ...

Round Underdash Louver with Housing, for 2" Duct Hose Bezel and louver unscrew from housing for easy installation. For 2-1/2" duct hose, use part #32-2X Dimensions: 3" wide x 3" tall Made in the ...

Old Air Products Round Louver for 2" Duct Hose Vanes twist to control direction of airflow and push to open or close. 2-3/4" overall diameter, and requires 2-1/2" diameter mounting hole. ...

Rectangle Louver w/ Housing, for 2 Inch Duct Hose Inlet For 2-1/2" Duct Hose, use part #32-60X Dimensions: 5-7/16"" wide x 2" tall Made in the ...

Tri-Vane Round In-Dash Louver, for 2" Duct Hose For 2-1/2" duct hose, see part #32-9X Overall Size: 2-1/2" Diameter Made in the ...

Factory Louver Set (Black Finish), for 1967-72 Chevrlet & GMC Trucks Louver set Includes right and left side louver assembly with black bezels, center louver, and new louver adapter for improved airflow. ...

Custom Round Corner Louver, Pair, for 2" Duct Hose Inlet Custom molded corner louvers fit neatly along the bottom edge of the dash against the kick panel w/ chrome ball louver.  For 2-1/2" duct hose, see part #32-10X Approximately 3-1/2" wide x 3-1/8" tall Made in the US

Round Dual Vane Louver, Chrome, for 2-1/2" Duct Hose 2-5/8" Diameter, Requires 2-1/2" hole for mounting For 2" duct hose, see part #32-13 Made in the ...

Factory Louver Template Kit for 1967-72 Chevrolet Truck Made in the USA ...

Small In-Dash Rectangle Louver, for 2" Duct Hose Overall Size: 3-15/16" wide x 1-1/2" tall  Requires 3-1/2" x 1-3/8" hole for mounting Made in the ...

Rectangle Dual Underdash Louver w/ Housing, for 2" Duct Hose Dimensions: 10" wide x 2" tall For use with 2-1/2" duct hose, see part #32-20X Made in the ...

Round Underdash Louver with Housing, for 2-1/2" Duct Hose Bezel and louver uncrew from housing for easy installation. For 2" duct hose, see part #32-2 Dimensions: 3" tall x 3" wide Made in the ...

Underdash Dual Rectangle Louver Housing, 2" Duct Hose Inlets For 2-1/2" duct hose, see part #32-3X Dimensions: 11-1/2" wide x 2" tall Made in the ...

Large In-Dash Rectangle Louver, 2" Duct Hose Inlet Overall Size: 4-3/4" wide x 1-1/2" tall Requires 4-3/8" x 1-3/8" hole for mounting Made in the ...

Large In-Dash Rectangle Louver, 2-1/2" Duct Hose Inlet Overall Size: 4-3/4" wide x 1-1/2" tall Requires 4-3/8" x 1-3/8" hole for mounting Made in the ...

Small In-Dash Rectangle Louver, for 2-1/2" Duct Hose Overall Size: 3-15/16" wide x 1-1/2" tall Requires 3-1/2" x 1-3/8" hole for mounting Made in the ...

Custom Round Corner Louver, Pair, for 2-1/2" Duct Hose Custom molded corner louvers fit neatly along the bottom edge of the dash against the kick panel w/ chrome ball louver.  For 2" duct hose, see part #32-10 Approximately 3-1/2" wide x 3-1/8" tall Made in the USA!

Custom Molded Ash Tray Louver Vents for 1940 Ford, Pair Made in the ...

Round Dual Vane Louver, Chrome, for 2" Duct Hose 2-5/8" Diameter, Requires 2-1/2" hole for mounting For 2-1/2" duct hose, see part #32-13X Made in the ...

Custom Molded Rectangle Corner Louver, Pair, for 2-1/2" Duct Hose Dimensions: 2-1/4" wide x 6" tall For 2" duct hose, see part #32-14 Made in the ...

Rectangle Trunk Louver Air Vent, Two 2" Duct Hose Inlets, Requires 2 Vents, Sold Each Large louver for use with Trunk mounted A/C Systems. Dimensions: 10" x 7" x 3-1/2" Recommended for use with Hurricane Trunk and Auxilliary A/C Units: IP-2000T, CAP-2000T, IP-2005T & ...

Rectangle Switch and Louver Combo, Underdash, for 2" Duct Hose Made in the USA! (Switches Not Included, Use w/ #51-17 Switching or #24-0001 Blower Switch & #24-0348 Thermostat ...

Rectangle Louver w/ Housing, for 2-1/2" Duct Hose For 2" Duct Hose, use part #32-1 Dimensions: 6-1/2" wide x 2" tall Made in the ...

Rectangle Dual Underdash Louver with Floor Outlets, for 2" Duct Hose Dimensions: 10" x 2" Made in the ...

Rectangle Underdash Dual Louver with Floor Outlets, for 2-1/2" Duct Hose Dimensions: 10" x 2" Made in the ...

Rectangle Dual Louver w/ Housing, for 2-1/2" Duct Hose Dimensions: 10" wide x 2" tall For use with 2" duct hose, see part #32-20 Made in the ...

In-Dash Square Louver, for 2" and 2-1/2" Duct Hose Dimensions: 3-1/2" x 3-5/8" Requires 2-3/4" x 2-13/16" hole for mounting Made in the ...

Round Louver with Dual Popup Vanes, for use with 2-1/2" Duct Hose Twist to control the direction of airflow and push to open or close. 2-3/4" overall diameter, requires 2-1/2" diameter hole for mounting. ...

Rectangle Louver w/ Housing, for 2-1/2" Duct Hose For 2" Duct Hose, use part #32-60 Dimensions: 5-7/16" wide x 2" tall Made in the ...

Square In-Dash Louver, 2" and 2-1/2" Duct Hose Inlet Overall Size: 2-7/16" tall x 2-1/2" wide Made in the ...

Large In-Dash Rectangle Louver, 2" Duct Hose Inlet For use with 2-1/2" duct hose, see part #32-8X Overall Size: 5-1/4" wide x 2" tall  Made in the ...

Large In-Dash Rectangle Louver, 2-1/2" Duct Hose Inlet For use with 2" duct hose, see part #32-8 Overall Size: 5-1/4" wide x 2" tall  Made in the ...

Tri-Vane Round In-Dash Louver, 2-1/2" Duct Hose Inlet For use with 2" duct hose, see part #32-9 Overall Size: 2-1/2" Diameter Made in the ...

Factory Dash Louver Set for 1967-72 Chevrolet and GMC Trucks Louver set  includes new reproduction dash louvers for center, right and left sides. Center louver assembly includes chrome louver and duct adapter. Right and left louver assemblies include Vent Ball, Housing, felt strips and

Rectangle Switch and Louver Combo, Underdash, for 2-1/2" Duct Hose Made in the USA! (Switches Not Included, Use w/ #51-17 Switching or #24-0001 Blower Switch & #24-0348 Thermostat ...

90 Degree louver adapter , for areas with limited space requiring a tight bend.  (2" Hose) Use with our 32-13, 32-13X,32-40, 32-40X, 32-41 and 32-41X Louvers  ...

Underdash Dual Rectangular Vents, with Floor Outlets, for 2" Duct Hose Dimensions: 11-1/2" wide x 2" tall For use with 2-1/2" duct hose, see part #32-3FX Made in the ...

1967-1968 Ford Mustang Passenger Side A/C Vent New High Quality reproduction passenger side vent with chrome housing and original style camera case finish for 1967-68 Ford Mustang. New duct adapters (#32-0006) are also available to connect factory side vents to factory a/c system ...

Underdash Pod for Rectangular Louver, Blank to Modify for your Controls Dimensions: 10-7/8" wide x 3-1/8" tall Use with #32-5 Louver for 2" Duct Hose or #32-5X Louver for 2-1/2" Duct Hose. (Louver Not Included) Made in the ...

Underdash Pod Housing for Dual Rectangular Louvers, Blank for Controls Dimensions: 8-1/2" wide x 4-3/4" tall Can be used with two #32-6 louvers for 2" duct hose or #32-6X louvers for 2-1/2" Duct Hose. (Louvers sold seperately) Made in the USA!

Underdash Dual Rectangular Vents, for 2-1/2" Duct Hose For 2" duct hose, see part #32-3 Dimensions: 11-1/2" wide x 2" tall Made in the ...

Old Air Products Metalized Tri-Vane Round In-Dash Louver, for 2" Duct Hose Overall Size: 2-11/16" Diameter Made in the ...

Metalized Tri-Vane Round In-Dash Louver, for 2-1/2" Duct Hose Inlet Overall Size: 2-11/16" Diameter Made in the ...

Louver Deflector w/adapt frame.  Rotating Lap and Floor Air Vent w/ Shutoff in Black Made in the ...

A/C Control Bezel and Louver Assembly for 1968 Ford Mustang Driver Side High quality reproduction of factory A/C control bezel/faceplate with louver. (Includes knobs) Features chrome housing and original style black camera case finish along with new knobs. (Note: Faceplate only, rear lever ...

Replacement Center Vent/Louver for 1969 Chevrolet Camaro models Made in the ...

Universal Fit Pod Housing, Deco Design, Cutout for Controls & Dual Vane Louvers (Louvers sold seperately) Dimensions: 12-1/4" wide x 3-1/2" tall Can be used with Electronic Rotary Control #49-0124C and two #32-13, #32-40 or #32-41 louvers for 2" duct hose, or #32-13X, #32-40X