|
Three Function Trinary Pressure Switch The Trinary Switch protects the system from excessive high or low system pressures, in addition to automatically operating electric radiator or condenser fans as needed for maximum system performance. Trinary Safety Switch Pressures: Low is off @ 28psig - and on @ 29psig High is off @ 454psig - and on @ 3 Part No: 24-0103 |
Old Air Products Binary Pressure Safety Switch protects the A/C system from excessive high or low system pressures than can damage the system componants. Includes: female binary pressure switch, wire harness with rubber boot, male & female electrical connectors and brass service port adapter. Pressure Switch Specifications Low - Off 28 PSIG Low - On 29 PSIG High - Off 454 Part No: 24-0102 |
Old Air Products Binary Pressure Safety Switch protects the A/C system from excessive high or low system pressures than can damage the system componants. Includes: female binary pressure switch, wire harness with rubber boot, male & female electrical connectors. Pressure Switch Specifications Low - Off 28 PSIG Low - On 29 PSIG High - Off 454 PSIG High - On 369 PSIG Part No: 24-0102 |
Rotary Switch Decals to easily identify switch functions. Rotary Switch Decals have an adhesive backing that can be applied to Trim Bezels or directly to the dash. Part No: 66-0051 |
Rotary Switch for Old Air Products Electronic Controls NOTE: This switch is Identified with yellow band at electrical connector. Part No: 24-0118 |
Indash Rotary Switching, Includes 3 speed blower switch, Thermostat w/48" Sensor Tube and black knobs with fan and snowflake symbol. Part No: 51-17 |
Rotary Switch for Old Air Products Electronic Controls NOTE: This switch is Identified without yellow band at electrical connector. Part No: 24-0117 |
Rotary On/Off Switch. Fits Old Air Products 45-0126 Underdasd Billit A/C Control. (Controls ... Part No: 24-0166 |
Ford Rotary Style Blower Switch, with 5 Blades All models without Resistor on Rear of ... |
Indash Rotary Switching, Includes 3 speed blower switch, Thermostat w/48" Sensor Tube, wire harness and knobs with fan and snowflake symbol. Part No: 51-17A |
Indash Rotary Electronic Switching Package For use with Old Air Products Hurricane Electronic Systems (1100, 2100 and 3100 Series) Switching package includes wire harness, electronic bypass heater valve, 3 speed blower switch, thermostat switch, and 2 rotary switches to control dash/defrost and heater valve functions. Can be used with underdash switching pod #32-29 t Part No: 49-26 |
Rotary 3 Speed Blower/Mode Switch This switch is used with: All Hurricane series units with rotary style blower switch. All Old Air Products Heat/Cool and Cool only Underdash style units. (200, 300, 400, 700 & 800 Series Units). * This switch is also commonly used on many of our competitors units as a Blower Switch and/or Mode Switch. Made in the USA! Part No: 24-0001 |
Molded Rubber Control Knob for Standard Rotary Switches with "D" Shaft, Fan Symbol Made in the ... Part No: 30-1005 |
Our Dual Fan & Shroud Assembly, Specifically Designed for 1967-1972 Chevrolet & GMC Trucks This kit includes a Relay Protected, Heavy Duty Wire Harness and your choice of Adjustable, 190*, or 205* temperature sensor. ... |
Wire Harness automatically operates Electric Condenser Fan to increase airflow across condenser when compressor clutch is engaged. Includes wire harness & relay. Wire Harness Kit Features: Heavy Duty 12 & 14 Gauge Wire 30 Amp Relay & Socket Weatherproof Fuse Holder Fully Labeled at Connectors Can be combined with condenser wire harness #50-0100, 50-0102 or 50-0107 to ... Part No: 50-0101 |
Our Dual Electric Fan Harness for running two Electric Fans Simultaneously Add this Dual Electric Fan Harness to our complete fan harness kits #50-0100, #50-0102, #50-0107 or condenser fan Harness #50-0101 Wire Harness Kit Features: Heavy Duty 12 & 14 Gauge Wire 30 Amp Relay & Socket Weatherproof Fuse Holder Fully Labeled at Connectors Made in the U Part No: 50-0111 |
Our Direct Fit, 1610cfm SPAL Electric Fan & Shroud Kit w/ Air Baffles You can upgrade this kit to add a Heavy Duty Wire Harness and your choice of Adjustable, 190*, or 205* temperature sensor. ... |
Custom Heat Cool & Defrost system for 1947-early 1955 Chevrolet and GMC trucks with compressor mounted on passenger side of engine. Custom mounting plate attaches the Hurricane unit to firewall using original heater mounting holes. The A/C & Heater fittings pass through the original factory blower motor hole with a custom rubber grommet. Compact design allows you to retain the cowl ... |
Custom Heat Cool & Defrost system for 1947-early 1955 Chevrolet and GMC trucks with compressor mounted on driver side of engine. Custom mounting plate attaches the Hurricane unit to firewall using original heater mounting holes. The A/C & Heater fittings pass through the original factory blower motor hole with a custom rubber grommet. Compact design allows you to retain the cowl vent ... |
Custom Heat Cool & Defrost system for 1947-early 1955 Chevrolet and GMC trucks with compressor mounted on passenger side of engine. Custom mounting plate attaches the Hurricane unit to firewall using original heater mounting holes. The A/C & Heater fittings pass through the original factory blower motor hole with a custom rubber grommet. Compact design allows you to retain the cowl ... |
Custom Heat Cool & Defrost Unit for 1947-early 1953 Chevrolet and GMC trucks with compressor mounted on driver side of engine and horizontal slots in speaker grill. Dash louvers fit neatly behind original speaker grill along with two underdash louvers for each side of the dash. Blower switch and thermostat also mount in the speaker grill. Rotary electronic switches to operate dash/defrost an |
Old Air Products Hurricane A/C, Heat & Defrost System for 1947-1953 Chevrolet and GMC Trucks, Indash Louvers Custom A/C, Heat & Defrost System for 1947 to early 1953 Chevrolet and GMC trucks with compressor mounted on passenger side of engine and horizontal slots in speaker grill. Dash louvers fit neatly behind original speaker grill along with two underdash louvers for each side ... |
Custom Heat Cool & Defrost system for 1947-early 1955 Chevrolet and GMC trucks with compressor mounted on driver side of engine. Custom mounting plate attaches the Hurricane unit to firewall using original heater mounting holes. The A/C & Heater fittings pass through the original factory blower motor hole with a custom rubber grommet. Compact design allows you to retain the cowl vent ... |