Rectangle Louver w/ Housing, for 2 Inch Duct Hose Inlet For 2-1/2" Duct Hose, use part #32-1X Dimensions: 6-1/4" wide x 2" tall Made in the ...

Round Underdash Louver with Housing, for 2" Duct Hose Bezel and louver unscrew from housing for easy installation. For 2-1/2" duct hose, use part #32-2X Dimensions: 3" wide x 3" tall Made in the ...

Rectangle Louver w/ Housing, for 2 Inch Duct Hose Inlet For 2-1/2" Duct Hose, use part #32-60X Dimensions: 5-7/16"" wide x 2" tall Made in the ...

Hose Adapter, for 2" Duct, with Flat Mount   Made in the ...

Round Underdash Louver with Housing, for 2-1/2" Duct Hose Bezel and louver uncrew from housing for easy installation. For 2" duct hose, see part #32-2 Dimensions: 3" tall x 3" wide Made in the ...

Custom Round Corner Louver, Pair, for 2" Duct Hose Inlet Custom molded corner louvers fit neatly along the bottom edge of the dash against the kick panel w/ chrome ball louver.  For 2-1/2" duct hose, see part #32-10X Approximately 3-1/2" wide x 3-1/8" tall Made in the ...

Duct Hose Adapter, 2" to 2-1/2" Inch Duct Hose Made in the ...

Rectangle Dual Underdash Louver w/ Housing, for 2" Duct Hose Dimensions: 10" wide x 2" tall For use with 2-1/2" duct hose, see part #32-20X Made in the ...

Underdash Dual Rectangular Vents, with Floor Outlets, for 2" Duct Hose Dimensions: 11-1/2" wide x 2" tall For use with 2-1/2" duct hose, see part #32-3FX Made in the ...

Custom Round Corner Louver, Pair, for 2-1/2" Duct Hose Custom molded corner louvers fit neatly along the bottom edge of the dash against the kick panel w/ chrome ball louver.  For 2" duct hose, see part #32-10 Approximately 3-1/2" wide x 3-1/8" tall Made in the ...

Custom Molded Rectangle Corner Louver, Pair, for 2-1/2" Duct Hose Dimensions: 2-1/4" wide x 6" tall For 2" duct hose, see part #32-14 Made in the ...

Rectangle Trunk Louver Air Vent, Two 2" Duct Hose Inlets, Requires 2 Vents, Sold Each Large louver for use with Trunk mounted A/C Systems. Dimensions: 10" x 7" x 3-1/2" Recommended for use with Hurricane Trunk and Auxilliary A/C Units: IP-2000T, CAP-2000T, IP-2005T & ...

Rectangle Switch and Louver Combo, Underdash, for 2" Duct Hose Made in the USA! (Switches Not Included, Use w/ #51-17 Switching or #24-0001 Blower Switch & #24-0348 Thermostat ...

Rectangle Louver w/ Housing, for 2-1/2" Duct Hose For 2" Duct Hose, use part #32-1 Dimensions: 6-1/2" wide x 2" tall Made in the ...

Rectangle Dual Underdash Louver with Floor Outlets, for 2" Duct Hose Dimensions: 10" x 2" Made in the ...

Rectangle Underdash Dual Louver with Floor Outlets, for 2-1/2" Duct Hose Dimensions: 10" x 2" Made in the ...

Rectangle Dual Louver w/ Housing, for 2-1/2" Duct Hose Dimensions: 10" wide x 2" tall For use with 2" duct hose, see part #32-20 Made in the ...

Underdash, Switch and Louver Plenum, 2" Duct Hose Inlet Dimensions: 3-1/2" tall x 26-1/2" wide x 3-1/4" deep Switches Sold Separately For use with 2-1/2" duct hose, see part #32-22X Made in the ...

Underdash, Switch and Louver Plenum, 2-1/2" Duct Hose Inlet Dimensions: 3-1/2" tall x 26-1/2" wide x 3-1/4" deep Switches Sold Separately For use with 2" duct hose, see part #32-22 Made in the ...

Blank Underdash Vent Housing for Modifying to Fit Own Vents, etc. Made in the ...

Center Underdash Housing for 2 Round Vents   Louvers not included. Use with Louver #32-9 for 2" Duct Hose or #32-9X for 2-1/2" Duct Hose. Dimensions: 11" wide x 3" tall Made in the ...

Underdash Center Pod for Round Vents, Die Cut for Billet Controls (Slide Control or Louvers not included) Dimensions: 11" wide x 3" tall,  Use with Louver #32-9 for 2" Duct Hose or #32-9X for 2-1/2" Duct Hose. Made in the ...

Underdash Center Housing for Three Round Vents (Louvers not included, 3 required) Dimensions: 11" wide x 3" tall Use with Louver #32-9 for 2" Duct Hose or #32-9X for 2-1/2" Duct Hose Made in the ...

Underdash Pod Housing for use with Round Vents and Diamond Layout Rotary Controls Use with #49-26 Rotary Controls and (2) #32-9 Louvers. Dimensions: 10-3/4" wide x 3-18" tall Made in the ...

Underdash Pod Housing, for Round Vents with Inline Layout Rotary Controls Use with #49-26 Rotary Controls and (2) #32-9 Louvers Dimensions: 10-3/4" wide x 3-1/8" tall Made in the ...

Center Underdash Switch Pod Housing, Inline Layout for 4 Rotary Controls   Use with electronic rotary switching package (#49-26) for Old Air Products Hurricane Systems. Measurements: 10" wide x 2" tall x 1-1/4" deep Made in the ...

Underdash Dual Rectangle Louver Housing, 2" Duct Hose Inlets For 2-1/2" duct hose, see part #32-3X Dimensions: 11-1/2" wide x 2" tall Made in the ...

Underdash Pod for Rectangular Louver and Die Cut for Billet Controls Dimensions: 10-7/8" wide x 3-1/8" tall Fits Horizontal slide controls #45-0114A (Aluminum face) & #45-0114B (Black Face). Use with Louver #32-5 for 2" Duct hose or #32-5X for 2-1/2" Duct Hose. ...

Underdash Pod for Rectangular Louver, Blank to Modify for your Controls Dimensions: 10-7/8" wide x 3-1/8" tall Use with #32-5 Louver for 2" Duct Hose or #32-5X Louver for 2-1/2" Duct Hose. (Louver Not Included) Made in the ...

Brushed Aluminum Vent Housing, for Round Vents Made in the ...

Brushed Aluminum Underdash Center Vent Housing Fits Louvers #32-13 & 32-41 Made in the ...

Brushed Aluminum Corner Vent Housing, for Elite Series Vents Made in the ...

Underdash Pod Housing for Dual Rectangular Louvers, Blank for Controls Dimensions: 8-1/2" wide x 4-3/4" tall Can be used with two #32-6 louvers for 2" duct hose or #32-6X louvers for 2-1/2" Duct Hose. (Louvers sold seperately) Made in the ...

Underdash Dual Rectangular Vents, with Floor Outlets, for 2-1/2" Duct Hose Dimensions: 11-1/2" wide x 2" tall For use with 2" duct hose, see part #32-3F Made in the ...

Underdash Dual Rectangular Vents, for 2-1/2" Duct Hose For 2" duct hose, see part #32-3 Dimensions: 11-1/2" wide x 2" tall Made in the ...

Round Vent Corner Pod Housing, Pair Custom molded corner louvers fit neatly along the bottom edge of the dash against the kick panel.  Made in the ...

Universal Fit Pod Housing, Deco Design, Blank for Controls and Louvers Made in the ...

Universal Fit Pod Housing, Deco Design, Cutout for Controls & Dual Vane Louvers (Louvers sold seperately) Dimensions: 12-1/4" wide x 3-1/2" tall Can be used with Electronic Rotary Control #49-0124C and two #32-13, #32-40 or #32-41 louvers for 2" duct hose, or #32-13X, ...

Universal Fit Pod Housing, Deco Design, Cutout for Controls and Tri-vane Louvers (Louvers sold seperately) Dimensions: 12-1/4" wide x 3-1/2" tall Can be used with Electronic Rotary Control #49-0124C and two #32-9 louvers for 2" duct hose or #32-9X louvers for 2-1/2" Duct Hose. Made in ...

Universal Fit Pod Housing, Deco Design, Blank for Controls and Louvers Dimensions: 11-1/8" wide x 3-1/2" tall Made in the ...

Universal Fit Pod Housing, Deco Design, Cutout for Controls and Dual Vane Louvers (Louvers sold seperately) Dimensions: 11-1/8" wide x 3-1/2" tall Two #32-13, #32-40 or #32-41 Louvers for 2" Duct Hose, or #32-13X, #32-40-x or #32-41X Louvers for 2-1/2" Duct Hose. Can be used ...

Underdash Pod for Dual Rectangular Louver and Die Cut for Billet Controls Fits Horizontal slide controls #45-0114A (Aluminum face) & #45-0114B (Black Face). Use with Louver #32-6 (QTY 2) for 2" Duct hose or #32-6X (QTY 2) for 2-1/2" Duct Hose. POD ONLY  (Louver and ...

Universal Underdash Pod, Blank, for use with additional gauges Dimensions   14" x 3-1/4" x 1-1/2" POD ONLY  (Louvers/Gauges  Not Included) Made in the ...

Underdash Switch Pod for Blower Switch & Thermostat Includes underdash pod and faceplate, Dimensions: 6" wide x 2" tall.   ( Recommended for use with #24-0001 Blower Switch & #24-0348 Rotary Thermostat) Made in the ...

Rectangle Louver w/ Housing, for 2-1/2" Duct Hose For 2" Duct Hose, use part #32-60 Dimensions: 5-7/16" wide x 2" tall Made in the ...

Rectangle Switch and Louver Combo, Underdash, for 2-1/2" Duct Hose Made in the USA! (Switches Not Included, Use w/ #51-17 Switching or #24-0001 Blower Switch & #24-0348 Thermostat ...

Underdash Pod Housing for Dual Rectangular Louvers, with cutout for Inline Controls Dimensions: 8-1/2" wide x 4-3/4" ...

Universal Fit Pod Housing, Deco Design, Cutout for Controls and Tri-vane Louvers (Louvers sold seperately) Dimensions: 11-1/8" wide x 3-1/2" tall Can be used with Electronic Control #45-0114A or B and two #32-9 louvers for 2" duct hose or #32-9X louvers for 2-1/2" Duct Hose. ...

Underdash Pod Housing for Dual Rectangular Louvers, with cutout for Electronuc slide control 45-0114 Dimensions: ...